Using the Dynamic Cone Penetrometer and Light Weight Deflectometer for Construction Quality Assurance

Specification target values for granular materials and fine grained soils are proposed. For granular material, the grading number and field moisture content are used to select the dynamic cone penetrometer (DCP) and light weight deflectometer (LWD) target values. A sieve analysis is used to determine the grading number and an oven dry test to determine the field moisture content. For compacted fine grained soil, the plastic limit and field moisture content are used to determine the target values. The plastic limit is used to classify the soil and to estimate the optimum moisture content for compaction. This report also provides further standardization of the LWD and DCP testing procedures and recommends three seating drops to ensure greater uniformity during testing. The DCP and LWD estimate the strength and modulus of compacted materials. More specifically, they measure the penetration and deflection. When measuring penetration and deflection, the moisture content remains a critical quality control parameter for all compaction operations. Therefore, the moisture content needs to be measured, or estimated confidently, at each location. The LWD and DCP are performance related construction quality assurance tests that are expected to: increase compaction uniformity, lower life cycle pavement costs, increase inspector presence at the construction site, improve documentation, and increase inspector safety and productivity.