Marasteanu, Mihai

The recently introduced Mechanistic-Empirical Pavement Design Guide (MEPDG) and related software provide capabilities for the analysis and performance prediction of different types of flexible and rigid pavements. An important aspect of this process is the evaluation of the performance prediction models and sensitivity of the predicted distresses to various input parameters for local conditions and, if necessary, re-calibration of the performance prediction models. To achieve these objectives, the Minnesota Department of Transportation (MnDOT) and the Local Road Research Board (LRRB) initiated a study "Implementation of the MEPDG for New and Rehabilitated Pavement Structures for Design of Concrete and Asphalt Pavements in Minnesota." This report presents the results of the evaluation of default inputs, identification of deficiencies in the software, sensitivity analysis, and comparison of results to the expected limits for typical Minnesota site conditions, a wide range of pavement design features (e.g. layer thickness, material properties, etc), and the effects of different parameters on predicted pavement distresses. Since the sensitivity analysis was conducted over a span of several years and the MEPDG software underwent significant modifications, especially for flexible pavements, various versions of the MEPDG software were run. Performance prediction models of the latest version of the MEPDG 1.003 were evaluated and modified or recalibrated to reduce bias and error in performance prediction for Minnesota conditions.

Significant resources can be saved if reactive type of maintenance activities are replaced by proactive activities that could significantly extend the pavements service lives. Due to the complexity and the multitude of factors affecting the pavement deterioration process, the current guidelines for applying various maintenance treatments are based on empirical observations of the pavement surface condition with time. This report presents the results of a comprehensive research effort to identify the optimum timing of surface treatment applications by providing a better understanding of the fundamental mechanisms that control the deterioration process of asphalt pavements. Both traditional and nontraditional pavement material characterization methods were carried out. The nontraditional methods consisted of X-Ray Photoelectron Spectroscopy (XPS) for quantifying aging, while for microcracks detection, electron microprobe imaging test (SEM) and fluorescent dyes for inspection of cracking were investigated. A new promising area, the spectral analysis of asphalt pavements to determine aging, was also presented. Traditional methods, such as Bending Beam Rheometer (BBR), Direct Tension (DTT), Dynamic Shear Rheometer (DSR) and Fourier Transform Infrared Spectroscopy (FTIR) for asphalt binders and BBR and Semi-Circular Bending (SCB) for mixtures were used to determine the properties of the field samples studied in this effort. In addition, a substantial analysis of measured pavement temperature data from MnROAD and simulations of pavement temperature using a one-dimensional finite difference heat transfer model were performed.

Across the state of Minnesota, asphalt roads under the jurisdiction of counties, cities and townships have been controlled by restrictions that limit the total weight of each truck that uses those roads during the spring thaw period. During this time, the pavement weakens and the bearing capacity of the roadway is reduced. These policies vary from county to county and from road to road, depending on the capacity of the roads - typically, 5, 7 and 9 tons. While spring load restrictions serve to extend the useful life of the road, they also add significant burdens to truckers who are forced to re-route their vehicles and/or increase the number of trips in order to adhere to the policies. This study assesses the economic impact of lifting all vehicle restrictions during the spring thaw period. Economic benefits of lifting the bans include reduced cost to carriers; potential cost includes reduced pavement life. Their research concludes that if the policy is changed, the costs of additional damage could be recovered from those who use the roads. Recovering those costs could take the form of annual fees, appropriate fuel taxes and/or user charges paid by vehicle operators.